Did you know that you can do more with Entry Lists than see current work-in-process transactions? The Fee, Cost, Payment, and Client Funds Entry Lists can be printed, filtered, and set to include archived records.
Entry Lists can be toggled to be hidden or displayed using the (Toggle List) button or Alt+G. Once the Entry List is displayed, the following additional buttons are available:
You enter data regularly; make sure you are getting the most out of your Entry List by showing the information you want to see and quickly printing lists when needed.
Tabs3 Billing includes a Flat Fee Billing feature, which allows you to enter your time for a matter normally throughout the billing period, and then write the amount of the fees proportionally up or down to a predetermined amount prior to running statements.
To configure a matter for flat fee billing
Once you have configured the matter for flat fee billing, you can enter time in Tabs3 Billing normally.
To adjust flat fee clients prior to running statements
Once the fees have been adjusted, you can run your statements normally.
Fees are always displayed in date order on statements. However, Tabs3 Billing does include a utility to change the order in which fees that share the same date will appear.
To change the order of fees on a statement
Note: The Reorder Fees utility works by editing the reference numbers assigned to the updated fees. Reference numbers on previously generated reports and verification lists may no longer refer to the original fees.
Do you have a new pro bono client, or need to enter a fee or cost at no charge for a regular client? Clients and transactions can be marked as non-billable so that you can still track your time without charging your client.
Non-billable Clients
If you have a client for which there will be no billable time, you may want to mark the client as non-billable. Marking the client as non-billable prevents the accidental entering of billable transactions for the client. Transactions can still be entered, but they will default to a non-billable Bill Code.
To mark a client as non-billable
Non-billable Transactions
When fees (or costs) are entered, the transaction’s Bill Code can be specified as 1 – Non-Billable / Non-Printable if you do not want the transaction to be printed on a statement or 2 – Non-Billable / Printable if you want the transaction to be printed on a statement.
When using a Bill Code of 2 – Non-Billable / Printable, transactions will be printed on the statement, but the amount will display “n/c” to indicate that there is no charge for the transaction. If desired, this text can be changed via Statement Customization.
To change the “n/c” terminology
You can optionally configure transaction codes (tcodes) to default to a non-billable Bill Code. This means that when you select the tcode on a transaction, the Bill Code will already be set as non-billable.
To specify a Bill Code for a tcode
In summary, there are three different ways to track non-billable transactions: mark the client as non-billable, specify a non-billable Bill Code when entering individual transactions, and/or configure tcodes to be non-billable. Take a look at these options and see which option is right for you the next time you need transactions to be non-billable.
There are several ways you might handle billing for a contingency case, but in the end you must adjust the amount owed based on the outcome. So what options does Tabs3 Billing provide?
Contingency billing occurs when a firm performs work for a client and gets paid contingent upon a settlement. There are many variations for this type of arrangement, such as whether or not costs will be billed, percentage amounts of the settlement, etc. When billing contingency clients using Tabs3 Billing, you typically bill them after the matter is settled; however, you may also want to bill them during the course of the matter. When billing during the course of the matter, you may want to bill only expenses or advances. You may also want the client to see the services rendered for a particular period without actually billing the fees. Then, once the matter is settled, you can write the fees/costs up or down and send the client a final bill.
For example, let’s say that you have a contingency client and you want to bill them monthly for all costs incurred, but not include fees on the statement. You must first create a statement template that includes the desired information on the statement, and then assign it to the contingency client.
To create a statement template for costs only
To assign a statement template to a client>
Using our example, let’s say that the matter has been resolved with a particularly good outcome. You determine that you need to write-up the client’s fees by $5,000 in order to meet the agreed upon percentage of the settlement that your firm will receive.
To write-up fees by an amount
You can now change the matter’s Final Template to a statement template that has a Fee Format of Standard and generate a final statement for your client. (As an alternative, you can select the statement template via Generate Statements.)
In Tabs3 Billing, PracticeMaster, and Tabs3 Connect, the Recap of Hours contains a graph that provides billable and non-billable hours and amounts at-a-glance, with the added ability to also see unprocessed time in PracticeMaster. By default, the bar graph will display the current week, and you can scroll forward and backward in time using the arrows at the top of the graph. Want to review and/or edit fees for a certain day? Simply click on the billable or non-billable time to open the Fee Recap Lookup window, where you can view the fee records or add new records on the fly! In PracticeMaster, click on the unprocessed time to open the Process Timer Records window so you can convert that time into billable fees.
The Recap of Hours can be accessed several ways.
To specify the Default Timekeeper, include a daily target comparison line, and, in PracticeMaster, to include unprocessed timer records, click the icon in the Recap of Hours window.
Although the Recap of Hours will always open to the Default Timekeeper selected, you can also select a different timekeeper for the current session.
Reviewing your time has never been easier!
When you’re not at the office and you need to record the time you spent on a matter or a cost you incurred, what do you do? Why, log into Tabs3 Connect on your phone or tablet, of course!
Tabs3 Connect makes it easy to enter fees and costs for a client even when you’re not at the office. No more writing notes on scraps of paper that can get lost, or in an app amidst a bunch of other notes. You can use your phone to enter fees and costs directly into Tabs3 Connect from anywhere and at any time!
To add a new Fee or Cost via Tabs3 Connect
Changing Your Start Page
Want to make entering fees even easier? Set up Tabs3 Connect to open to a new fee as soon as you log in.
To set Tabs3 Connect to open to a new fee
For more information on Tabs3 Connect, contact your Tabs3 Software consultant, call Support at (402) 419-2210, or visit Knowledge Base Article R11480, “All About Tabs3 Connect.”
Did you know that you can change your view to see either more fields or fewer fields in certain files?
By clicking the (Detail/Rapid) button, or pressing Alt+I, you can specify whether you see all of the fields in a file or only key fields. This option is available in the Tabs3 Billing Fee, Cost, Payment, and Client Funds Entry windows, as well as the AP Invoice/Manual Check Entry window. Detail mode includes all of the fields, whereas Rapid mode simplifies the data entry process by only showing the most pertinent fields.
The following fields are not shown when in Rapid Mode:
Tabs3 Billing Fee Entry – Hours to Bill, Rate, Amount, Category, Bill Code, Rate Code, Status, User ID, Date Entered, Sales Tax
Tabs3 Billing Cost Entry – Timekeeper, Bill Code, Rate Code, Status, User ID, Date Entered, Sales Tax
Tabs3 Billing Payment Entry – Status, User ID, Date Entered
Tabs3 Billing Client Funds Entry – User ID, Date Entered
Accounts Payable Invoice/Manual Check Entry – Due Date, Voucher #, Amount to Pay, Discount Amount, Discount Date, Net Amount, Take Discount, Hold/Pay, User ID, Date Entered
Take a moment to look at these options and see if you can help streamline data entry for your office!
Tabs3 Billing includes the flexibility to create rules that designate how payments are allocated to various timekeepers and to the firm. With Fee Compensation Rules, you have the ability to allocate payments for fees to the firm as well as to multiple originating, primary, and secondary timekeepers. Additionally, reporting features in Tabs3 Billing let you see allocations based on your pre-defined compensation rules.
Once a payment has been allocated based on the defined rules, any remainder is distributed amongst the working timekeepers on a pro-rated basis.
Each matter can have a unique Fee Compensation Rules Table or can share a table with other matters. A shared table makes it easier to update multiple matters that all use the same allocation rules.
The Receipt Allocation Report and the Allocated Payments Report can include fee compensation information. Additionally, the Top Client Report can optionally use fee compensation amounts for fees paid.
To learn more about how Fee Compensation Rules can improve your receipt allocation reporting, open the Tabs3 Billing Help (press F1) and enter “Fee Compensation” on the Index tab.
Did you know that you can quickly convert Journal, Calendar, and Document Management records into billable fees? Use the Convert to Fee option in PracticeMaster to convert emails, research records, timers, notes, meetings, tasks, documents, and more into fees. Converting records into fees helps make sure your clients are being billed for the time you spend on their matters.
Converting a record to a fee
When you convert a record to a fee, a Convert to Fee window is opened which shows the same fields as the Fee file. If the original record does not contain a Client ID, you will be prompted to select a client before the Convert to Fee window is opened. When applicable, the Date and Description fields are automatically populated from the original record. You can then enter any other information for the fee record such as the Timekeeper, Tcode, Hours to Bill, etc. and save.
There are multiple ways to convert a record into a fee.
When a record is converted to a fee, a new fee is created without removing the record from the Journal, Calendar, or Document Management file.
Convert to Fee Settings
Default settings can be specified for calendar, email, note, phone, research, timer, and document records via Convert to Fee Settings (In the Quick Launch, search for and select “Convert to Fee Settings”). Settings are saved per user, so each login user has their own default settings. Default settings are broken down by record type (e.g., timer, email, document, etc.) and provide defaults for tcode, timekeeper, description, time to bill, and more.
Make sure you don’t have billable time that’s slipping away. Start converting records to fees and see how much additional time you can bill for.
When entering information into the software, have you saved an entry only to realize you needed to enter the same description into the next entry as well? If so, there is an easier and quicker way than going back to the last record to copy the information. When you are in Fee, Cost, Payment, or Client Funds, pressing F2 while in the description field will automatically replace the transaction code’s default description with the Description entered for the previous entry saved during the current data entry session.
Looking for a quick way to apply a discount to your client’s bill? Including a Courtesy Discount in your statements may be the solution you are looking for!
In the Using Courtesy Discounts video, see how easy it is to apply discounts to your clients based on a specified percentage or amount. Additionally, you can view how the discount will appear on your statements and how to customize the terminology and placement based on your needs.
Watch this two-minute video here:
Training Videos can be accessed at Tabs3.com/videos. You can also access the videos in the Quick Launch by searching for and selecting “Training Videos.”
Do you make manual adjustments for flat fee clients when you’re ready to bill them? If so, you may be making billing more difficult than it needs to be. Tabs3 Billing provides a way to streamline billing for flat fee clients.
To set a client up to be billed a flat amount, specify that they are a flat fee billing client and assign them to a statement template that does not bill fees. You can then enter your time normally. Once you are ready to bill the client for the flat amount, run the Adjust Flat Fee Clients utility, and then bill them using a statement template that does bill fees.
To set up a client for Flat Fee Billing
If desired, you can bill interim statements to show the client progress on the matter. Using a Final Template with a Fee Format of Info Only will show the fees, but not bill for them.
To process a final bill for the flat fee amount
Note: Due to the number of transactions that may be changed, we recommend making a backup of your data prior to running the Adjust Flat Fee Clients utility.
When the Adjust Flat Fee Clients utility is run, all of the client’s fees are automatically adjusted to equal the client’s specified Flat Amount, making billing a breeze and leaving you time to work on other projects.
Version 2022 has some great new features to check out!
Unified Contacts
Enhanced Lists
New Filters and QuickViews
1099-NEC Forms
Updated Calendar Code File
Exchange Online Integration
Updated Installer
For in-depth information on all of the new Version 2022 features, including screenshots, refer to Knowledge Base Article R11880, “Version 2022 Introduction to New Features.” A list with links to all Version 2022 information can be found in R11885, “Version 2022 Information and Resources.”
To download Version 2022, visit Tabs3.com/update or contact your local consultant.
You meet up with a client away from the office, they want to write a check for what they owe, but you don’t have the balance due with you. What do you do? Simply log into Tabs3 Connect, and have the amount in a matter of seconds!
With Tabs3 Connect, you can use the Matter Manager to see exactly how much your client owes. Matter Manager’s Billing Summary provides client-specific information that includes the current amount due, work-in-process fees and costs, aged balances, and more. Make sure you’re not fumbling for a figure, or having to call the office. Accessing Tabs3 Connect is quick, easy, and secure!
For more information on Tabs3 Connect, contact your consultant, call Technical Support at (402) 419-2210, or visit Knowledge Base Article R11480, “All About Tabs3 Connect.”
It’s officially a new year! In the fuss of all your regular year-end tasks, don’t forget to review these sometimes overlooked items: Timekeeper Rates, Timekeeper Profitability Figures, Client and Task Based Billing Budgets, and General Ledger Budgets!
It’s a new year and you want to increase your timekeeper rates, but how can you make the change happen for all applicable timekeepers on a specific date?
Tabs3 Billing makes it easy to seamlessly update timekeeper rates. You can specify the new rates and the effective date for the change, and the software will then automatically use the new rates for any applicable fees saved for that date or later. Transactions entered for a prior date will use the old rates.
To easily determine current timekeeper rates, run the Timekeeper List (From the Quick Launch, search for and select “Timekeeper List”).
To update rates and set an effective date for the new rates
Tip: Once you are certain fees will not be entered for dates prior to the new rates, use the Move Rates button in the Timekeeper file to easily move rates from the New Rate 1-6 fields to the Hourly Rate 1-6 fields.
If any time was entered with old timekeeper rates prior to updating the Effective Date of New Rates and New Rate fields, and the transactions are still in work-in-process, you can use Change WIP Transactions (In the Quick Launch, search for and select “Change WIP Transactions”) to change transactions all at once. (Note: Because Change WIP Transactions can make changes to a large number of transactions in the software at one time, we strongly recommend making a backup prior to using this program.)
If you run the Timekeeper Profitability Report, or you plan to start, you may want to review and update the profitability figures (overhead) set up for each timekeeper. Firms typically update a timekeeper’s overhead when their salary or benefits, such as insurance, change. These figures can be used by the Timekeeper Profitability Report to determine a timekeeper’s realized profit.
To easily determine current timekeeper overhead, run the Timekeeper List (From the Quick Launch, search for and select “Timekeeper List”), making sure to select the Overhead Amounts check box.
To update a timekeeper’s overhead
Tabs3 Budgets
Now that your firm’s timekeepers are squared away, consider reevaluating any budgets you currently have set up for your clients and adjust as necessary.
Setting up client budgets, and keeping them updated, helps ensure you are not spending more time than desired on a client’s matter. You can optionally select to display a warning when a fee or cost transaction is added if the budgeted hours or amount for the client has been exceeded.
To easily determine current budgets set up for each client, run the Client Budget Report (In the Quick Launch, search for and select “Client Budget Report”).
To update a client’s budget
Task Based Billing Budgets
Like client budgets, it is a good idea to review how much you have budgeted for task based billing clients’ activities and expenses. You can optionally display a budget exceeded warning when more than the amount entered for the phase or task is saved.
To easily determine current task based billing budgets for each client, run the Task Code Budget Report (From the Quick Launch, search for and select “Task Code Budget Report”).
To update a client’s task based billing budget
General Ledger Budgets
Budgets for your general ledger expense accounts are a must, and Tabs3 General Ledger (GL) makes it easy to set up budgets for a new year!
To easily determine current budgets for each account, run the Budget Report (In the Quick Launch, search for and select “Budget Report”).
To update budgets in GL
It’s easy to overlook these periodic maintenance items. Be sure to schedule some time to make sure rates, overhead figures, and budgets are all current!
With PracticeMaster, you can use timers to track the time you spend on research, planning, correspondence, and more. However, if you don’t turn timers into fees, you may be missing out on valuable time that can be billed to your clients.
Process Timer Records (from the Quick Launch, search for and select “Process Timer Records”) provides the ability to convert your timer and other journal records into fees. You can optionally process records into individual fees or combine multiple timer records into a single fee, provided the records are for the same client.
To select a record in the Process Timer Records window, click in the column or click the to place a check mark next to the record. If you want to remove the check mark from a record, click in the column again or click the . Once one or more records have been selected:
When clicking the Combine to Fee or Convert to Fee buttons, a Convert to Fee window will be opened, allowing you to edit the Fee before saving. Default Fee values for each record type (Email, Phone, Research, Timer, and more) can be specified via the Convert to Fee Settings utility (from the Quick Launch, search for and select “Convert to Fee Settings”). Specifying default values such as the tcode, timekeeper, description, and minimum time to bill can help streamline your Process Timer Records routine.
If you’re not already using the Process Timer Records feature, consider adding it to your process to help make sure you’re getting paid for your time.
We added a new way to view clients, contacts, fees, costs, payments, client funds, and write offs without having to run a report! When accessing the new Tabs3 Billing lists, you can work with entries using the actions in the Quick Clicks pane, or drill down for additional details. Lists are available via the File | Open menu in Tabs3 Billing or by searching the Quick Launch for “clients,” “contacts,” “client funds,” “fees,” “costs,” “payments,” and “write offs.” The data entry windows for these record types are now available via File | Data Entry or by searching the Quick Launch for “client information,” “contact information,” “client funds entry,” “fee entry,” “cost entry,” and payment entry.”
Filtering
Filtering is a powerful feature. For example, you could filter the Client file to only show clients for which you’re the primary timekeeper. As another example, you could filter the Fee file to only show fees entered in the last week. There are a few ways to filter in the lists.
Quick Clicks
The Quick Clicks pane includes the following additional groups:
Download the latest version of the software to get this great new feature!
If you need to report on fees, costs, or payments, the Transaction File List or Task Code Billing Report is your answer. Both reports have great flexibility and options. The Transaction File List and Task Code Billing Report have similar options. The Task Code Billing Report includes task based billing clients only. However, the Transaction File List includes both task based transactions and non-task based transactions.
The following are examples of when you may want to run a Transaction File List or Task Based Billing Report:
For a closer look at the Transaction File List, including detailed examples and report setup, as well as a comparison to the Task Based Billing Report, visit Knowledge Base Article R11039, “How the Tabs3 Transaction File List Can Work for You.”
Did you know that you can split fees and costs between multiple matters in Tabs3 Billing? Split Billing provides the ability to enter fees and costs once, but split the charges between multiple matters. You must first determine which client you will be entering fees and costs for; this is your “main client.” Next, determine which clients/matters will be splitting the bill, and for what percentage each party will be responsible.
To configure clients for split billing
Fees and costs may be entered before and/or after configuring split billing, but keep in mind that when it comes time to perform the split, only those fees and costs entered for the main client will be split amongst all parties.
When you are ready, you can Perform Split Billing (Statements | Statement Preparation | Perform Split Billing). Transactions that have already been split cannot be split again so this can be run as often as needed. Perform Split Billing should be run prior to generating statements every time in order to make sure that all transactions are billed appropriately.
If, after performing the split, you need to change the way in which transactions should be split, simply Undo Split Billing (Maintenance | Transaction Related | Undo Split Billing). This will revert all split transactions for the selected Main Client ID and Split Billing Ref # that are still work-in-process to their pre-split values. This provides a way to make adjustments as needed.
If you have even one client who splits amounts due with other matters, and you’ve been splitting the fees and costs manually, make your billing easier by using the Split Billing feature in Tabs3.
For more information on split billing features, see Knowledge Base Article R11616, “All About Tabs3 Split Billing,” the Billing Adjustments Guide, and the Split Billing Training Video.
When it comes to maximizing your billable hours, it’s important to have a reliable timer feature that allows you to easily convert your time into fees.
The Using Timers in PracticeMaster video shows how easy it is to record time spent in meetings, on phone calls, and doing other work, as well as how to quickly convert and process your timer records.
Watch this four-minute video here:
Training Videos can be accessed at Tabs3.com/videos. You can also access the videos while in the software by selecting Help | Training Videos.
In a law firm, there can be an overwhelming amount of information to manage – matter information, contact information, upcoming meetings, research, emails, and documents galore. But there is hope! PracticeMaster can help make you more organized than you’ve ever been before. PracticeMaster provides the tools you need to manage it all.
Calendar – View not just your calendar, but your firm’s calendar. View appointments for a specific client or matter, an employee, or view appointments based on any information in the calendar record such as dates, calendar codes, and location.
Contacts – Don’t just search your list of contacts; see all contacts for any matter at a glance, and every matter in which a particular contact is associated.
Document Management – Specify how you want to name and file your documents, and then let PracticeMaster do it for you! Optionally use Fujitsu® ScanSnap™ to scan and import documents. Quickly see all documents for a case, or different versions of the same kind of documents across all your cases.
Matter Manager – Tie everything for a matter together in one place: calendar records, contacts, email, meeting notes, documents, billing summary, and more!
Conflict of Interest – Maintain ethical walls by searching files, documents, email attachments, and contacts for key words. Optionally limit results to certain files, and more.
Timers – Use timers to track your time, phone tasks, and research. Switch between timers as needed, and then process timer records into fees!
Filtering – Add filters to your files so that you can easily see only those records that you want to see.
QuickViews – QuickViews combine a filter, column layout, and sort option into a tab at the top of the List tab of any file, which allows you to quickly switch your view depending on the records you are working with. Add Smart tabs to provide an additional level of record sorting.
Integration – Integrate calendar records and contacts with Outlook. Install the PracticeMaster toolbar in Outlook®, Internet Explorer, Microsoft® Word, Excel®, PowerPoint®, Adobe® Reader or Acrobat®, and WordPerfect® to save documents and research to PracticeMaster, or to create journal entries, calendar entries, or fees from within the other software. Integration with CalendarRules™, NetDocuments®, and more is also available!
Areas of Practice – Areas of Practice provide a way to save separate information for different types of matters, without having the clutter of everything all in one file or set of files.
Report Writer – Create custom reports using the fields in PracticeMaster.
WorkFlows – Help automate your workload by creating WorkFlows to automatically start tasks or notify other users based on specified events.
Document Assembly – Help automate form letters by creating document templates that pull information from any file in PracticeMaster. Once created, simply select the client and the template, and it does the rest.
For a complete list of PracticeMaster features, refer to Knowledge Base Article R11548, “PracticeMaster Feature Comparison.” For more information about PracticeMaster features or to purchase a license of PracticeMaster, contact your consultant, or contact our Sales Department at (402) 419-2200.
When a timekeeper’s rate changes, it can be tricky to make sure that all fees are entered correctly before and after the change. Tabs3 takes the stress out by providing the ability to change rates automatically based on the date of the fee.
The Effective Date of New Rates field in the Timekeeper file can be used to automatically switch to a new rate as of a specific date. Fees dated prior to the specified date will use the previous rate, whereas fees dated on or after the specified date will use the new rate. The How Can I Change the Rate for Future Billing video walks you through this process and provides an example of how it works.
Watch this two-minute video here:
Training Videos can be accessed at Tabs3.com/videos. You can also access the videos while in the software by selecting Help | Training Videos.
When entering fees in PracticeMaster, an automatic WorkFlow can be configured with a filter to only trigger when fee descriptions exceed 300 characters for a specific range of matters or clients.
To create a WorkFlow that prompts the user when a fee description is too long
You now have a WorkFlow that is automatically triggered when the length of a fee description exceeds a set number of characters for a particular Client ID range. A prompt is displayed letting the user know that the description is too long for that client and reopens the record for editing.
Note: WorkFlows are a PracticeMaster-only feature. Fees entered or edited in Tabs3 will not trigger the WorkFlow.
For more information on WorkFlows, refer to our PracticeMaster WorkFlows Guide at Tabs3.com/support/docs.html or Knowledge Base Article R11307, “All About WorkFlows.”
Transferring and replicating fees and costs just got easier in Tabs3 Billing! With the release of Version 19.1.11, two new buttons have been added to the Fee and Cost Entry windows, allowing you to quickly transfer or replicate an entry.
Transfer Fees and Costs
The ability to transfer fees and costs has long been available using the Transfer Transactions program. However, you can now transfer fee and cost transactions to a different matter directly from the Fee and Cost Entry windows using the new Transfer button. Any fees and costs that have not been final billed and/or updated can be transferred to another client. When transferring a fee or cost, you can optionally select to update the rate to use the new client’s rate, and then recalculate the amount.
Replicate Fees and Costs
In addition to the Transfer option, you can now replicate fees and costs using the Replicate button in the Fee and Cost Entry windows. Replicating fees and costs makes a copy of the transaction and saves it to the desired Client ID. Like the Transfer feature, when replicating a fee or cost, you can optionally select to update the rate to use the new client’s rate, and then recalculate the amount.
As of Version 19, when using the Write-Up/Write-Down Fees and Costs program (Statements | Statement Preparation | Write-Up/Write-Down Fees and Costs), an Include All Matters for this Client check box is now available.
Prior to billing, you can use the Write-Up/Write-Down program to write-down unbilled fees, costs, or hours for a client using a range of timekeepers, transaction codes, categories, and/or dates. When writing multiple transactions up or down, each affected transaction’s amount and/or hours is adjusted by an amount proportional to the total adjustment.
When this option is selected, the Write-Up or Write-Down will include transactions for all matters for the specified Client ID. All matters that begin with the same value left of the decimal with work-in-process will be included in the calculated client total based on the criteria selected in the Transaction Selection section.
In most data entry files, like the Journal, Document Management, and Calendar files, you can easily change the Client ID by opening a record and changing it or via the Change Client ID feature. However, before now, there wasn’t a way to change the Client ID for a fee or cost in PracticeMaster without deleting the record and starting over. We recently enhanced Version 19 so that you can now use the Change Client ID feature in the PracticeMaster Fee and Cost files!
The Change Client ID feature can be used for one record, or multiple selected records. Additionally, you have the option to update the rate based on the selected client, which will automatically recalculate the amount of the transaction(s). The Change Client ID features can be accessed via the following:
When you change the Client ID of a record that has been processed into a fee, the linked fee’s Client ID will also be changed.
If you use the Convert to Fee feature, customizing your Convert to Fee Settings can be a time saver!
Default settings can be specified for calendar, email, note, phone, research, timer, and document records via Convert to Fee Settings (Maintenance | Preferences | Convert to Fee Settings). Settings are saved per user, so each login user has their own default settings. Default settings are broken down by record type (e.g., timer, email, document, etc.) and provide defaults for tcode, timekeeper, description, time to bill, and more.
For example, you can specify the Default Timekeeper setting for each record type to one of the following:
This means that every time you convert a record to a fee, the timekeeper will be automatically entered based on your preferred setting for that record type.
As another example, you can specify a particular tcode, or task based billing code, for each record type. This means that you could set a default tcode of “14 – Communicate with” for email type journal records, and a default tcode of “10 – Legal research” for research type journal records.
By specifying Convert to Fee Settings, you will have less editing to do when converting records to fees, making this administrative task run quicker and more smoothly.
Fees can occasionally be entered in an order that may be confusing on a statement. For example, when the statement is printed out, it might look like you reviewed a document before writing the first draft! In Version 19, you can use the Reorder Fees utility to change the order in which fees with the same date are displayed on a single statement.
The order in which fee transactions are printed on a statement is based on three levels:
The Reorder Fees utility (Statements | Statement Preparation | Reorder Fees) lists all work-in-process fees for the selected client. Fees can be moved using the Move Up and Move Down buttons. Moving fees up and down changes the reference number of the fee immediately.
However, keep in mind that fees can only be moved up or down within the same date. For example, if there are three fees dated 2/15, and one fee dated 2/16, only the fees dated 2/15 can be moved.
You can use the Group fees by drop-down option to see what order fees would be listed on a client’s statement based on the Subtotal selected in the Statement Template. When selecting Draft or Final, the fees will be grouped as specified in the Subtotal field of the selected client’s Draft or Final Statement Template.
Take a look at how fees are shown on your clients’ statements, and see how the Reorder Fees utility can help you. Your clients will appreciate the order, and you might get paid faster!
This can be accomplished by creating a WorkFlow that prompts the user if they’d like it to run when a Document Management record is created with a particular Document Type (e.g., “Form” or “Proposal”). Fee and email values will be entered automatically.
Once the WorkFlow completes, the document can easily be attached to the email.
To automatically create a fee and start an email every time Document Management records are added with certain Document Types
When run, this WorkFlow will start an email to which the document can be attached. To attach the document to the email, select the PracticeMaster tab of the email, click Attach PM Document, and then select the new Document Management record from the list.
Note: This WorkFlow can be created for each Document Type, as needed.
For more information on WorkFlows, refer to our PracticeMaster WorkFlows Guide at Tabs3.com/support/docs.html or Knowledge Base Article R11307, “All About WorkFlows.”
Occasionally, transactions may accidentally be entered for the wrong client. If there are only a couple, it’s easy to just delete them and reenter them for the correct client. However, when there are many transactions, what can you do? Use the Transfer A/R and Transactions utility in Tabs3!
The Transfer Transactions program can be used to transfer unbilled fees, costs, and/or payments between clients. When selecting to transfer fees, costs, and/or payments, you can select a range of transactions based on tcode, timekeeper, category, date, and/or reference number. This can help make sure that you are only transferring the transactions that you want to transfer.
Additionally, if a time comes when you want to transfer one client’s full accounts receivable balance, ledger, archived transactions, and client funds to another client, the Transfer A/R and Transactions utility can also be used. This function will transfer ALL of the client’s ledger records and billing history to another client. It is not possible to only transfer a client’s current A/R without also transferring everything else.
Note: When using the Transfer A/R and Transactions utility, keep in mind that once the transfer has been performed, the only way to undo it is by restoring from a backup.
To transfer transactions between clients
Keep this utility in mind the next time transactions need to be transferred from one client to another client. It can save you significant time.
A WorkFlow can be configured to edit a field provided there is a consistent character (or set of characters) indicating where the fee’s description begins. For our example, we will use “***” as an indicator. With a WorkFlow set up to automatically edit the description field of a new fee, the journal record will retain the original text, but only the text after “***” will be included in the fee. Additionally, if an attorney wants an entire journal record’s description included, they simply have to omit the character (or set of characters) from the description.
For example, let’s say a journal record that you will convert to a fee includes the text “could not find precedence.” You don’t want your client to see this on their bill. With this WorkFlow, you could change the description to “could not find precedence *** Research,” and when the WorkFlow runs, “Research” is all that will be included in the Fee Description.
To set up a WorkFlow that automatically trims the Description field
Note: This WorkFlow will run for any new fee entry provided that, in this example, there is *** present.
Note: In order for this WorkFlow to run properly, Description Field must be specified as the Default Description for Convert to Fee Settings (Maintenance | Preferences | Convert to Fee Settings).
Note: Before saving the Fee, the additional text will still be shown. The additional text is only removed after the save has been completed.
Alternative Methods: As an alternative, you can use the statement comments attribute in the Journal record for text you don’t want printed on a statement. Using statement comments suppresses the text from printing on a final statement, but displays in red in the Journal and Fee records. Additionally, in draft statements and reports, statement comments will be shown with a strikethrough character (e.g., could not find precedence). To use statement comments, select the desired text, right-click in the Description or Comment field of the journal record, and then select Statement Comment.
Another option to prevent text in the Journal record from being included in the fee description is to specify a different Default Description such as Tcode/Activity Code Description in the Convert to Fee Settings (Maintenance | Preferences | Convert to Fee Settings). This option uses the selected Tcode’s default description for the fee instead of the text from the Journal record.
For more information on WorkFlows, refer to our new PracticeMaster WorkFlows Guide at Tabs3.com/support/docs.html or Knowledge Base Article R11307, “All About WorkFlows.”
Did you know that you can convert calendar, e-mail, note, phone, research, timer, and document records into fees? This allows you to easily bill your client for the time spent on their matter.
The Converting Records to Billable Fees video shows you how to convert records to fees via the Matter Manager, Calendar and Journal file, and the Process Timer Records utility. Additionally, this video walks you through the Convert to Fee Settings, which allow you to specify default settings to be used (e.g., Tcode, Minimum Time to Bill, etc.) for each type of record.
Watch this eight-minute video here:
Training Videos can be accessed 24 hours a day, 7 days a week, at Tabs3.com/videos. You can also access Training Videos while in the software by selecting Help | Documentation and then clicking the See also link for Tabs3 and PracticeMaster Training Videos.
When entering fees and costs for task based billing clients, do you have to scroll through all of the Phase/Task or Activity Codes for other categories to get to the set of task codes applicable for your client? If you use Billing Categories for your clients, you can assign Task Code Sets to your categories so that when entering fees and costs, only the task codes that are associated with that client’s Billing Category are displayed.
To assign a Task Code Set to a Category
The next time you enter fees and costs for a client assigned to the Category selected, you will only see the Task Code Set assigned to the Category. This can greatly reduce the number of Task Codes to choose from.
When adding features for Version 18, we did not overlook Tabs3 Connect! Check out these new enhancements included when you update to Version 18:
For more information on Tabs3 Connect, contact your reseller and consultant, contact Technical Support at (402) 419-2210, or visit Knowledge Base Article R11480, “All About Tabs3 Connect.”
Did you know that you can easily split fees and costs between multiple matters in Tabs3 Billing? The Split Billing program provides the ability to enter fees and costs once, but have multiple matters pay for them. You must first determine which client you will be entering fees and costs for; this is your “main client”. Next, determine which clients/ matters will be splitting the bill, and for what percentage each party will be responsible. You can now configure split billing for the client.
To configure clients for split billing
Fees and costs may be entered before and/or after configuring split billing, but keep in mind that when it comes time to perform the split, only those fees and costs entered for the main client will be split amongst all parties. Additionally, only Type 0 (Normal) and Type 5 (Miscellaneous) fee and cost transactions that are not on hold can be split.
When you are ready, you can run the Perform Split Billing program (Statements | Statement Preparation | Perform Split Billing). Transactions that have already been split cannot be split again so this program can be run as often as needed. The Perform Split Billing program should be run prior to generating statements every time in order to make sure that all transactions are billed appropriately.
If, after performing the split, you need to change the way in which transactions should be split, simply run the Undo Split Billing program (Maintenance | Transaction Related | Undo Split Billing). This program will revert all split transactions for the selected Main Client ID and Split Billing Ref # that are still work-in-process to their pre-split values. This provides a way to easily make adjustments as needed. If you have even one client who splits amounts due with other matters, and you’ve been splitting the fees and costs manually, make your billing easier by using the Split Billing feature in Tabs3.
For more information on split billing features, see Knowledge Base Article R11616, “All About Tabs3 Split Billing,” the Billing Adjustments Guide, and the Split Billing Training Video.
Did you know that you can add the PracticeMaster Toolbar icons to the Quick Access Toolbar in Microsoft Office 2007 and later? To add any of the PM Open, PM Save, PM Journal, PM Calendar, and/or PM Fee buttons to the Quick Access Toolbar, simply right-click the icon on the PracticeMaster ribbon and select Add to Quick Access Toolbar.
Tabs3 Connect has been around for some time now, but what exactly is Tabs3 Connect, and what can it do for your firm? Tabs3 Connect is a Platinum feature that provides access to Tabs3 and PracticeMaster anywhere you can connect to the Internet. No apps to download, simply go to Tabs3Connect.com and log in using your phone, tablet, laptop, or other internet-enabled device. Access client and contact information, enter fees and costs, use Matter Manager, access your firm’s calendar, receive alarm notifications, send and receive eNotes, and download documents and e-mail attachments via Tabs3 Connect. On smartphones and tablets, you can tap to create a fee, and flick to scroll through a list.
Keeping your data secure is top priority, and Tabs3 Connect was designed to protect attorneys’ sensitive information. The information you access using Tabs3 Connect is secure because it resides at your office, on your computer. It won’t be stored on someone else’s server in the cloud, or on a phone that you might lose. Furthermore, you choose who has access to Tabs3 Connect and who doesn’t, and access profiles affect users logged in to Tabs3 Connect as well. You can even keep track of Tabs3 Connect access and activity by reviewing the Tabs3 Connect Access Log and Tabs3 Connect Log.
If you already have Platinum, take advantage of this great feature and change the way your firm works! Don’t have Platinum yet? Now is a great time to explore the possibilities.
For more information on Tabs3 Connect, contact your reseller, consultant, or Technical Support at (402) 419-2210; or, visit Knowledge Base Article R11480, “All About Tabs3 Connect.” For more information on all of the great Platinum features, visit Knowledge Base Article R11379, “Platinum Overview.”
You may work with multiple matters throughout the day, so how can you ensure that you are keeping an accurate account of how much time is spent on each task? The PracticeMaster Timer window (File | Timer) can be used to track Time Tasks, Phone Tasks, and Research Tasks. Each record is saved to the Journal file and can include the Client, Work Description, Contact, a Description of the task, and more. Start and stop the timer for tasks throughout the day from the Timer window as needed.
Once you’re ready to bill a client for your time, you can easily turn timer records into fees using the Process Fee Records program (File | Process Timer Records). When processed, a record is created in the Fee file for the designated client, and a timer record is maintained in the Journal file. This makes it easy to keep track of your time, and to accurately bill clients for work. Using the PracticeMaster Timer means you will never again have to guess at how much time you spent on tasks.